The question “Can You Vacuum Water Using Shop Vac and Normal Vacuum” is an issue for many vacuum users nowadays. Let’s tell the truth: When your floor or carpet is full of water, all you can think of is a vacuum cleaner, right?
But hold on a minute! Let’s see what your vacuum type is and whether it can be used for water hoovering. Also, see my small tips with your vacuum cleaner to get rid of the water in an emergency!
Table of Contents
- Can You Vacuum Water? Using Shop Vac and Normal Vacuum
- How to Use a Shop Vac to Hoover All Water Up?
- Can Normal Vac Vacuum Water?
- How to Turn A Normal Vacuum to A Wet/Dry Vacuum?
Can You Vacuum Water? Using Shop Vac and Normal Vacuum
Yes! Why not?
Do you know the other name of Shop vac? It’s the Wet-Dry Vac Cleaner. Hence, as its name describes, we can use this type of cleaning device for picking up water. Superior to regular vacuum cleaners, shop vacs are created to hoover huge objectives such as debris from woodworking, big items, etc. Therefore, it is best to use a shop vac in construction, woodshops, or factories.
A shop vac is a giant vacuum with a tank and wheels so you can bring it all over the place you want to sweep. Identical to other vacuums, it has a sizable long pipe to suck dust and debris with a collection bag to contain objectives.
A perk that helps this device stand out from other vacuuming devices is the container as it can keep water inside without leaking. For that reason, it is safe to use shop vacs to pick water up.
How to Use a Shop Vac to Hoover All Water Up?
Step 1: Empty The Vac
Your electric broom’s bucket must be empty, so it is ready to contain water and other objectives.
However, always clear the vacuum after using it to make sure it’s always clean! You may not want to see dust float all over water in the bucket.
But if your vacuum cleaners have separated wet and dry tanks, you are good to go immediately!
Step 2: Remove Filter
Based on your vacuum, you may have to remove the paper filter inside the machine. This step will allow water to flow into the bucket.
If you cannot take the filter out, make sure to rinse the paper after using it. So check the guidebook of your device carefully to make sure what you have to do with your vacuum cleaner.
Step 3: Find a Place to Release Water
Depending on what kind of shop vac you have, you may need to pour water in the middle of the cleaning period or just look for a place for your vac to pump water out.
If your vac has an output hose, all you need is to attach the hose to the vac and find a place to release water inside. A garden appears to be the right place.
In the event that your vac can pick water up only, you should watch out when your vacuum’s tank is full to empty it. Or else, your vacuum will be broken down.
Step 4: Start Vacuuming
Now, are you ready to suck all water up? This step is a piece of cake. All you need to do is to turn your machine on and vacuum as usual. See? Not problematic at all.
Things to Remembers:
- Some wet/dry vac don’t automatically stop working while the container is full. When the device’s working sound is different or it operates slowly, the tank is likely to be nearly filled up.
- Always unplug the vacuum first before emptying the collection tank.
- Never use your cleaners to pick hazardous liquids.
Can Normal Vac Vacuum Water?
Sadly, the answer is no.
Typical vacuum cleaners are engineered to pick dust and small particles only. If you try to vacuum water with your regular vac, probably, your machine will be damaged.
Like every vac, regular vacs have collection bags to contain dust and objectives. However, different from shop vac, these bags or vacuum cleaners cannot hold water. Thus, you should only vacuum dry surfaces with these machines.
If you try to suck water with a dry vacuum, there will be a chance of water leaking, which is followed by damages and, worse, electrocution.
How to Turn A Normal Vacuum to A Wet/Dry Vacuum?
You need to clean water while the only thing you have is an ordinary vacuum cleaner? Don’t worry. Here is our hack to help you out in emergency cases.
Step 1: Prepare Materials.
All you need is a big bottle or a lidded bucket to contain water, a knife, and a pipe to pump water. Make sure that the container has enough capacity.
Step 2: Cutting Time
Use the knives to cut two holes in the bottle to attach hoses. The first hole should be on the top of the container for your vacuum’s hose.
Moreover, to avoid the machine picking up water unexpectedly, the other hole should not be too close to the first hole. A distance of around 20cm is suitable. Provided that the cavity is more significant than the pipe, use some tape to wrap it until it fits the hole.
Step 3: Attach The Pipe to The Bottle/Bucket
Choose one hole to attach your vac’s pipe and another for an additional hose. You should then seal the joint with friction tape to ensure the tubes will not fall out in the middle of your cleaning time.
Step 4: Vacuuming
Now you can start your vacuum as usual. Turn your cleaning device on, then attach the additional hose to the place you want to tidy up. Remember, always check if the bottle/bucket is full to empty it.
Something You Should Remember:
- You should only use this DIY wet vacuum for a small amount of water like a damp carpet. Overusing it will damage your machines, so you should hire or borrow a real shop vacuum if you need to clean a pool or unclog your toilet.
- This hack is just for emergencies. You had better not substitute your regular cleaners for a real wet-dry vacuum.
- Never use your vacuum to pick toxic chemical liquids.
- Though a normal vacuum cannot pick water, it does not mean that you should buy a shop vac to clean your house since each vacuum fits with different jobs.
We(Clairoliviawayman) bet now you know the answer to this question: “Can You Vacuum Water Using Shop Vac and Normal Vacuum.” Cleaning water is not as severe as usual if you have a vac cleaner, especially when you have our guide no matter what kind of vacuum you have.
And now, let’s start pumping all the water out of your house!